The following documents provide information concerning the flood resistant provisions of the 2012 International Code Series®, the 2009 International Code Series®, highlights of American Society of Civil Engineers (ASCE) 24-05, and a comparison of the 2009 I-Codes, ASCE 24 and the National Flood Insurance Program (NFIP) requirements.
This document is a compilation of flood resistant provisions, prepared by the Federal Emergency Management Agency (FEMA), of the 2012 International Code Series (IBC, IRC, IEBC IMC, IPC, IFGC, IPSDC, IFC). Also included, as a separate document, is a summary of changes from the 2009 IBC. The 2012 edition of the I-Codes contains provisions that are consistent with the minimum flood-resistant design and construction requirements of the NFIP for buildings and structures.
This document is a compilation of flood resistant provisions, prepared by FEMA, of the 2009 International Code Series (IBC, IRC, IEBC IMC, IPC, IFGC, IPSDC, IFC). Also included, as a separate document, is a summary of changes from the 2006 IBC. The 2009 edition of the I-Codes contains provisions that are consistent with the minimum flood-resistant design and construction requirements of the NFIP for buildings and structures.
Highlights of ASCE 24-05 Flood Resistant Design and Construction
The American Society of Civil Engineers (ASCE) 24-05 is a referenced standard in the International Building Code® and the International Residential Code®. Any building or structure that falls within the scope of the IBC that is proposed in a flood hazard area is to be designed in accordance with ASCE 24-05. The IRC requires that dwellings in floodways be designed in accordance with ASCE 24-05, and the 2009 and 2012 editions of the International Residential Code (IRC) includes an alternative that allows communities to require homes in V Zones to be designed in accordance with ASCE 24-05. Highlights of ASCE 24-05 that complement the NFIP minimum requirements include: Building Performance; Flood-Damage Resistant Materials; Utilities and Service Equipment; and Siting Considerations.
This document contains a Plan Review Checklist for Flood Hazard Area Application Review and an Inspection Checklist for Flood Hazard Area Inspections in both A Zones and V Zones. The checklists are from Reducing Flood Losses Through the International Code Series (3rd Edition) which can be ordered from the International Code Council, Inc. or downloaded from the FEMA Library.
This table is a comparison of the provisions of the 2009 I-Codes/ASCE 24-05 and the National Flood Insurance Program (NFIP) requirements.
This guide illustrates the similarities and highlights the differences between the National Flood Insurance Program (NFIP) minimum requirements and the requirements of the International Code Series (I-Codes) and ASCE 24, Flood Resistant Design and Construction (ASCE 24), a standard referenced by the I-Codes. The illustrations highlight some of the key similarities and differences between foundation types, lowest floor elevations, enclosures below elevated buildings, and utilities requirements contained within the NFIP and I-Codes for most residential and commercial buildings (classified as "Category II" structures by the building codes).
This document contains Flood Resistant Provisions of the 2012 editions of codes published by the International Association of Plumbing and Mechanical Officers (IAPMO): the Uniform Mechanical Code; Uniform Plumbing Code, Uniform Swimming Pool, Spa and Hot Tub Code; and Uniform Solar Energy Code.
This sub-study evaluates the NFIP building standards, including a review of flood loss and damage data for structures and communities, and calculation of costs and benefits of modifying NFIP building standards across defined ranges of flood conditions and building configurations, differentiated by flood hazard zone.
This document provides a supplement analysis to the 2006 Evaluation of the National Flood Insurance Program’s Building Standards. The purpose of this document is to determine the cost-effectiveness of including freeboard within the foundation height of new residential buildings constructed in floodplains, and to establish which factors should be considered when determining how many feet above the minimum NFIP-required elevation a house should be constructed in order to maximize cost-effectiveness.
CodeMaster for Flood Resistant Design
The CodeMaster provides designers with an easy-to-use desk reference that identifies the flood provisions in the 2009 and 2012 International Building Code® (IBC®) and International Residential Code® (IRC®), as well as the flood requirements of American Society of Civil Engineers (ASCE) standards 7-05, 7-10, and 24-05. The CodeMaster is a unique and useful tool for designers to make sure that they incorporate the flood-resistant provisions of these codes and standards. The 8-page guide provides sections on preliminary considerations and design process, key flood terminology, a 12-step process to incorporate flood resistance in the design of a building, an example showing the 12-step process being executed, and information on additional FEMA mitigation resources related to flood-resistant design. The document also uses illustrations to ensure a clear understanding for users in the professional community.