alert - warning

This page has not been translated into Tiếng Việt. Visit the Tiếng Việt page for resources in that language.

Hazard Mitigation Under the Individuals and Households Program

Release Date:
Tháng 6 10, 2021

As part of its commitment to helping make communities stronger and more resilient, FEMA will include additional assistance for mitigation in Home Repair Assistance awards for disasters declared on or after May 26, 2021. This assistance will allow eligible homeowners impacted by Presidential Disaster Declarations to repair or rebuild stronger, more durable homes. The authority to provide this assistance is derived from the Robert T. Stafford Disaster Relief and Emergency Act[1] (Stafford Act) and further clarified in the Individual Assistance Program and Policy Guide.[2]

Homeowners who are eligible for Individuals and Households Program (IHP) assistance may receive additional funds from FEMA for specific mitigation measures. Additional funds will be provided within the award amount for homeowners determined eligible for Home Repair Assistance from FEMA. The specific mitigation measures include:

  • Roof repair to withstand higher winds and help prevent water infiltration.
  • Elevating a water heater or furnace to avoid future flood damage.
  • Elevating or moving an electrical panel to avoid future flood damage.

Applicants will be informed if they qualify for assistance that includes these mitigation measures. The amount of assistance is subject to the Stafford Act limit for Housing Assistance, which is $36,000 for FY2021. The mitigation measures are limited and will only be provided for components that were present and functional prior to the disaster and were damaged by the disaster.

Roof Repair Mitigation

  • For asphalt shingle roofs, FEMA recommends replacing damaged or destroyed shingles with new shingles designed to withstand wind speed velocity of up to 116 miles per hour.
    • Homeowners with asphalt shingle roofs who receive funds for roof repair mitigation should verify the replacement asphalt shingle packages are labeled to indicate compliance with ATSM[3] D7158 for wind resistance.
    • For more information on techniques for roof repairs that mitigate wind and water damage, please refer to Hurricane Michael Recovery Advisory 2 (2019), Best Practices for Minimizing Wind and Water Infiltration Damage.
  • For extensive roof damage, funds may also include costs for a heavier rubberized membrane to be applied before shingles are replaced and thicker sheathing material to help reduce or eliminate interior water damage.
  • For non-shingle roofs, the funds can be used for design and installation techniques that can improve roof performance against the disaster risks for the applicable geographic area.

Furnace and Water Heater Mitigation Measures

  • Elevating a furnace or water heater above the floor may help reduce the likelihood of future flood damage.
  • FEMA recommends elevating a damaged or destroyed furnace or water heater on a framed platform.
  • Before elevating a furnace or water heater, homeowners should check with their local utility company to find out whether any requirements would limit elevation of these items.
  • For more information on techniques for elevating a furnace or water heater to reduce the risk of future flood damage, please refer to FEMA Publication 312, Homeowner’s Guide to Retrofitting 3rd Edition (2014), Chapter 9, Protecting Service Equipment. 

Main Electrical Panel Mitigation Measures

  • Elevating or relocating electrical panels may help reduce the likelihood of future flood damage.
  • Utility company requirements and the National Electrical Code place limits on where electrical service equipment can be located. Before elevating an electrical panel, homeowners should check with their local utility company to find out if any requirements would limit elevation or relocation of an electrical panel.
  • For more information on relocating electrical systems, please refer to FEMA Publication 312, Homeowners Guide to Retrofitting 3rd Edition (2014), Chapter 9, Protecting Service Equipment.

State, territory, tribal, and local government requirements may be different than FEMA’s guidance and recommendations. Therefore, before including the recommended mitigation measures into home repairs, homeowners should work with their local building departments to make sure all state, territorial, tribal, and local requirements are being met. For communities participating in the National Flood Insurance Program, homeowners should contact their local floodplain administrator to learn more about flood mitigation measures appropriate to the home type and geographic area.

Additional Information

For more information, visit the following website:

  1. Individual Assistance Program and Policy Guide
  • See Chapter 3: Individuals and Households Program Assistance

 

[1] Section 408 (c)(2)(A)(ii).

[2] Chapter 3, E., pg. 86-88.

[3] ASTM International, formerly known as American Society for Testing and Materials, is an international standards organization that develops and publishes voluntary consensus technical standards for a wide range of materials, products, systems, and services.

Tags: