- NFIP Requirement
- Related Keywords
- Special Topic Resources
- Supplemental Information for Breakaway Wall
A wall that is not part of the structural support of the building and is intended through its design and construction to collapse under specific lateral loading forces, without causing damage to the elevated portion of the building or supporting foundation system. Any walls below the lowest floor in a building in a V Zone should give way under wind and water loads without causing collapse, displacement, or other damage to the elevated portion of the building or the supporting pilings or columns.
- 59.1 - Definition
- 60.3 - Flood plain management criteria for flood-prone areas
- (e)(4) - V Zone Elevation Requirement
- (e)(5) Free of Obstruction Requirement
- IS-9 Managing Floodplain Development Through The National Flood Insurance Program (NFIP) (pages 5-50, 5-51) (PDF 8MB, TXT 1MB) (entire document)
- 9-99, Design and Construction Guidance for Breakaway Walls Below Elevated Coastal Buildings (Technical Bulletin 9) (2008)
- Flood Damage-Resistant Materials Requirements (Technical Bulletin 2) (2008)
- Free-Of-Obstruction Requirements (Technical Bulletin 5) (2008)
Special Topic Resources
- Certification Requirements
- Solid Breakaway Wall Panels
- Coastal Construction Manual (FEMA 55) 12.4.6 Breakaway Wall Enclosures
Supplemental Information for Breakaway Wall
Communities may wish to limit the area enclosed by solid breakaway walls to less than 300 square feet because:
- Flood insurance rates increase dramatically for enclosures larger than 300 square feet.
- Larger areas encourage conversion to habitable living areas, which are difficult to detect and enforce as violations.